Thursday, June 9, 2011

Directions for saw horses

How to for saw horses and work bench.

Scroll down to next post for blog.

Thanks.








































This last video is an overview of wood working. There are other instructional vids too.














This next video from the Wood Whisperer is pretty good.I'm wondering if it would work for boat shelves?




This would be useful since I like the cordless tools. Could attach the station using the french storage (see video above) Note the storage system for tools and use of painter tape for reference.





And for that board that I love but that's full of knots?



LOL I think it might be from West Marine. Not sure. Will check.


AH ha. Finally. How to pick out wood. This information is what I was trying to find out when I visited the homestore.




This next video is the entry for a series of vids on designing and constructing custom furniture. It's a great resource to the mindset of the furniture designer/craftsman. Unfortunately the embed isn't functioning so I have the link

http://www.youtube.com/user/TheWoodWhisperer#p/c/A40C8267444836F7/5/j7iRp3PGONU

I've noticed that each of these guys have things that they do that will be good to incorporate into wood working.

.
Here's a project that I'd love to try out. two videos












Outboard motor work stand with running motor. Hmm If I can make it long enough to hold the boat motor and trolling motor. Hmm. And I do like that shelf for the gas can, batteries and water cooling thingy.

Thinking thinking.

There's these guys...

(don't know what they're saying but they are highly entertaining and the music is catchy)



And look! "Plumber's crack!"




LOL, I didn't have these vids when I made my work table and saw horses. I just looked at it as a sculpture and viola! A table and saw horses. I'm thinking that would be the best way to look at my next project.

Have a busy day outside.

AuthorAnn

.

8 comments:

  1. Yay. The blog is back and running. It wasn't for a bit.

    ReplyDelete
  2. http://www.ehow.com/how_110401_buy-lumber-diy.html

    ReplyDelete
  3. From the link above

    A successful do-it-yourself project starts with good wood. At first you may think there's a secret lumberyard code when you confront the many types and dimensions of wood. But once you take time to learn how the industry assigns grades and determines sizes, it's easy to choose and order the lumber best suited for your purpose--and maybe save money, too.
    Difficulty:Moderate
    Instructions
    1


    Using a plan or sketch of your project, take a cutting list of all the pieces you need in each length to a lumberyard. You'll find a broader selection, better quality and more expertise there than at a home center.

    2


    Choose softwood or hardwood. Most construction lumber is softwood and is milled from fast-growing evergreens--pine, fir, cedar, redwood--in 2-foot increments from 6 to 20 feet in length. Hardwood comes from dense-grained deciduous trees such as maple, cherry and oak. Used for fine woodworking, it's available in more thicknesses and in random widths and lengths.

    3


    Match grade to purpose. To guarantee uniformity, lumber is graded by the quality of its surface. Terms differ for softwoods and hardwoods, but all describe appearance rather than strength. Look for clear- or select-grade boards for visible projects like shelves or decks. Select grade has few knotholes or discolorations. Common grade, which has more defects and is usually cheapest, is fine for items you plan to paint.

    4


    Decipher lumber sizes. Sawmills cut wood into standard sizes, from 1 to 8 or more inches thick and 4 to 12 or more inches wide. When this rough lumber is planed, it loses 1/8 inch or more from each dimension, so a 2-by-4 is actually 1.5 by 3.5 inches.

    5


    Buy precut wood for popular uses--stair treads, window trim, shelving and pieces such as spindles and furniture legs. These save time and take the guesswork out of choosing species and grade, but cost more.

    6


    Order lumber by the linear foot or the board foot. Use the former to order moldings, trim and same-dimension lumber (30 linear feet of 1-by-6 boards, for example). Use the latter to order random- width hardwood by volume for building furniture. As an example, 1 board foot equals 144 cubic inches.

    ReplyDelete
  4. More from the link above

    7


    Select pine or fir for rough-cut projects and framing. Pick hardwood for fine furniture and projects that will get a clear finish. Pine cuts easily and takes paint and varnish well. In hardwoods, ash and poplar are typically painted because they stain unevenly. Stain maple and oak to highlight their grain. Walnut is strong and stains nicely; beech looks great varnished or stained but is hard on saws.

    8


    Inspect for defects. Knots are a cosmetic flaw (unless they're large or about to pop out), but splits often get wider. To check for warping, lift one end of a board and sight down its edge to see if it bends in either direction. To check for bowing or arching, lay the wood on a level surface. A seriously bowed, cupped or crooked board is seldom workable, although minor bows will flatten out as you nail.

    9


    Check moisture content, or seasoning. Lumber is kiln-dried (KD) or air-dried (AD). KD wood has about 8 percent moisture content; AD, 15 to 25 percent. For indoor furniture, KD lumber is preferable because the wood shouldn't dry out any further.

    10


    Choose plywood for its strength and stability, the result of gluing several thin layers of wood together at right angles. Plywood used for sheathing, subfloors and rough carpentry typically has a veneer of Douglas fir, graded on each side. If both sides will show in your finished project, buy A-A or A-B grade. Plywood comes in 4-by-8-foot panels 1/4, 3/8, 1/2, 5/8 or 3/4 inch thick ($14 to $40 for Douglas fir, according to grade and thickness).

    11


    Use hardwood-veneer plywood for furniture and cabinetry. It also comes in 4-by-8-foot sheets, but most dealers will sell a partial sheet. Thicknesses range from 1/8 to 3/4 inch; the latter costs $65 to $105 per sheet. Be sure to ask for cabinet-grade plywood, which is typically 9-ply birch coming from Denmark and other sources, and available through plywood distributors. Use finish-grade plywood for built-in projects, combined with more costly solid woods for exposed areas. You can get plywood with a veneer of virtually any kind of wood in the world.

    12


    Shop for alternatives to old-formula pressure-treated lumber (see Warning) for building decks, picnic tables and play structures. Heartwood grades of redwood and cedar are naturally rot- and insect-resistant; prices vary widely by season and location. Consider composite (wood-plastic) lumber for durable, splinter-free decking. Engineered lumber products come from small-diameter and fast growing plantation trees. They use wood fiber more efficiently than conventional lumber, reducing pressure on old-growth forests and resulting in stronger structures. Choose exterior plywood--made with waterproof glue--for other outdoor projects.

    ReplyDelete
  5. Tip from the link above




    The only way to ensure that you get high-quality wood is to pick out the boards yourself-- or at least approve their selection.



    Lumber describes milled wood more than 2 inches thick. Thinner wood is technically a board. Wood thicker than 5 by 5 inches is timber. Now you know.



    Lumber prices vary by season, region, availability and demand.



    Once you've calculated how much wood your project requires, get 10 percent extra to allow for mistakes and to match grain. Don't buy more than that. Wood can warp if it's not stored in ideal conditions.



    Countries outside the United States have different systems for sizing lumber.



    Lumber preserved with chromated copper arsenate (CCA) is potentially hazardous. It will not be sold after December 31, 2003. Ask about alternatives.

    ReplyDelete
  6. Signs of heat illness from e How


    These may be signs of moderate heat-related illness, according to the Centers for Disease Control and Prevention (CDC):

    • Heavy sweating

    • Paleness

    • Muscle cramps

    • Tiredness

    • Weakness

    • Dizziness

    • Headache

    • Nausea

    • Fainting

    The CDC outlined the following as possible signs of more serious heat-related injury that will require immediate response:

    • An extremely high body temperature (above 103°F)

    • Red, hot and dry skin (no sweating)

    • Rapid, strong pulse

    • Throbbing headache

    • Dizziness

    • Vomiting

    • Confusion

    • Unconsciousness


    Remedy? Get to a cool area. Slowly hydrate. Sit in a cool area. Sport drinks may hydrate but don't use salt tablets.

    Prevention

    Cool, loose, light colored clothing.

    Hydrate before you go and drink water while outside.

    Wear a hat and sunscreen.

    Take shade. An old fashioned by handy thing to do is take an umbrella and a fan.

    ReplyDelete
  7. How to grade lumber from eHow

    Pine lumber is soft wood made from different pine trees. There are four major types of pine lumber used commonly in construction. White pine is a soft, lightweight wood. Deal is a finishing wood, used in interiors of houses. Sugar pine, considered an all-purpose wood, is utilized in interiors and exteriors. Southern pine, also called yellow pine, is the most common in the United States. Many building codes require that houses constructed with pine be graded to ensure proper levels of strength and stability. The American Softwood Lumber Standard PS 20-99 is the standard that has been applied to grading pine since 1999.

    ReplyDelete
  8. how to build a shed

    http://mystorageshed.blogspot.com/2007/03/building-sidewalls.html

    ReplyDelete